Rosas de fita de cetim

Alguém pode nos ensinar a fazer uma rosa de fita de cetim, conforme figura abaixo ? Encontrei esse site e ela faz trabalho com fita que são lindos. Obrigada

1 member likes this

Attachments:

Imagem2.png, 171 KB
Imagem1.png, 354 KB

Replies to This Discussion

Permalink Reply by Cara in NC on August 25, 2011 at 13:49

They are both so lovely!!

Permalink Reply by Kim Bradshaw on August 25, 2011 at 14:53

Gorgeous work!

Permalink Reply by Cara in NC on August 25, 2011 at 16:29

Step 1. Bias cut about 18 - 24 inches of silk satin into a long strip about 2 - 3 inches wide. Fold in half (iron lightly to hold in place) to conceal raw edges; alternately you can use Hanah silk. Wind the center into a tight roll and stitch to secure. Do not cut the thread or silk satin Step 2. Having ribbon to the left of the roll, fold the ribbon so it forms a 45-degree angle with itself; move the roll into the center of the fold; stitch to secure. Keep the roll the same height as the fold. Roll until the long length of ribbon is left of the roll again. Keep folding and rolling and stitching until the rose is the size you want. End by folding the last bit of the ribbon around the rose and securing with stitches.

Permalink Reply by Cara in NC on August 27, 2011 at 9:54

Hanah silk works best.

Permalink Reply by Algecira Castro on August 27, 2011 at 13:06